Jeep Parts:
For more Jeep tech info:
Off-Road's Jeep Tech Pages
From a 1971 CJ5:
Frame: Needs a new rear crossmember, front bumper is bent, rear shock mount bolts are broken off, some rust but overall quite solid, $50
Grille: good condition, $50
From a 1968 CJ5:
Hood: good condition, $50
Grille: good condition, slightly bent, $30
From a 1967 CJ5:
225 cubic inch Buick V6 engine (factory option). Very rusty bores and combustion chambers. Should be rebuildable. No bellhousing or flywheel included. Disassembled, $FREE if you pick it up…
T86AA tranny: poor condition- rusty inside. $FREE
Hood: fair condition, $30
From a 196? CJ:
Hood: good condition, $50
From a 1952 CJ3A:
L-head engine: Cylinder head and carb are missing. Bellhousing and manifolds included. Will need rebuilding, $FREE if you pick it up…
From a 1946 CJ2A:
Spicer 18 transfer case: 1-1/8" intermediate gear shaft. 26-tooth, six spline input gear, $25
Dana 27A ring & pinion gear set: used in the front axle of many pre '72 Jeeps 4.10:1 ratio (41 and 10 teeth) Dated 1964. Some pitting. Very little visible wear- no chips. With ring gear bolts and pinion nut and washer- no yoke, $30 including shipping